stsProxy Releases - Updated 2010901

2010/09/01
Fix bogus "no auth info received" error.

2010/07/29
Added 401/407 authentication when using spoofFrom=yes. Requires stsProxy and all SipToSis channels to use same passwd.

2010/07/27
Fix spoofFrom causing loss of tag in From header.

2010/07/26
Fix RE-INVITE handling.

2010/07/22
Fix Re-INVITE issue not sending reinvite to same channel.

2010/07/21
outbound_proxy can be used to change target destination based on original target - see samples/stsproxy.cfg for example.

2010/07/16
Fix some problems with spoofFrom=yes.
New parameter spoofFromAddress - allows setting to anything you want.

2010/04/08
Added new parameter inboundOnlyUserList to keep specified channels from being used for outgoing calls.

2010/04/06
Allow loopback address (IE. 127.0.0.x) to be accepted without additional configuration.
Allow from_url to register without interference to SipToSis channels. This allows it to act as a regular provider for some PBXs.
Fix spoof from code to use the correct address.
Fix some signaling problems.

2010/03/10
New parameter blockDuplicateInboundCalls
New parameter duplicateCallResponse

2010/02/13
Documentation improvements to readme.txt

2010/01/09b
Fix error if all targets removed.
Fix removed targets not writing  to registation database.
Fix busy causing removal from targets.
This version works.

2010/01/09
Added New parameters:
removeRegStatusCodes - Will remove a channel that returns these statuses from the available channel list
removeDeadChannels - Turn on the remove a non responding channel from the available channel list
See sample stsproxy.cfg for usage.
These new changes have not been tested.

2009/12/17
Added stsProxy_Control script for linux. (You have to run stsProxy once to get it copied from the samples folder - or copy yourself)

2009/12/10
Updated to my latest mjsip library
Added some params that may be useful in sample configuration file.

2009/10/08
   First Version

Last edited by MH (2010-09-02 01:11:26)