1 Topic by WhistleMaster

  • WhistleMaster
  • Member
  • Offline

Topic: Using more than one SIP phone

Hello !

First, thank you very much for your work on SipToSis !

I managed to setup correctly SkypeToSipAuth.props for one SIP phone with the following:

*,sip:Phone1@192.168.1.100:5060


As I have 2 SIP phones, I would like that both rings when someone calls me. I tried the following without success:

*,sip:Phone2@192.168.1.200:5060 | sip:Phone1@192.168.1.100:5060


Is it possible to have 2 SIP phones ringing ? How do you specify this in SkypeToSipAuth.props ?

Thank you very much
Kind regards

Last edited by WhistleMaster (2010-12-20 12:21:30)

2 Reply by MH

  • MH
  • Administrator
  • Offline

Re: Using more than one SIP phone

SipToSis does not support multi SIP targets/Ring all - it's not meant to be a PBX.

What you can do is either target a PBX or SIP provider that does support that. A local PBX will give the best results.